Two Way Radio Miscellaneous Parts and Accessories

The 0378372A01 Motorola Thumb Screw is the replacement Screw for the APX and XPR Speaker Mics

Motorola 0580379B46, 0580379B46: The 0580379B46 Motorola Gromet comes as a 10 Pack and used with mobile radio antenna installation

Motorola 15012157001, 15012157001: The 15012157001 Motorola Accessory Dust Cover is for use with the XPR 3000 and XPR 7000 Radio Series

Motorola 15012279001, 15012279001, 15012058001: The 15012279001 Motorola Audio Jack Cover comes as a single pack. The 15012279001 was also known as 15012058001

Motorola 1505579Z01, 1505579Z01: The 1505579Z01 Motorola Dust Cover Assembly covers the audio accessory port when not in use. See Inset photo #5 for 1505579Z01 location

Motorola 1571477L01, 1571477L01: The 1571477L01 Motorola Dust Cover features Flexible Rubber, Antenna Loop, Screw, Protects Accessory Port in the absence of audio devise and Designed for use with the MotoTRBO XPR 6000 Radio Series  

Motorola 1575250H01, 1575250H01: The 1575250H01 Motorola Dust Cover is the Accessory Port Cover

Motorola 1575250H02, 1575250H02: The 1575250H02 Motorola Dust Cover is used with SRX 2200 Radio

Motorola 1586390Z01, 1586390Z01: The 1586390Z01 Motorola HOUSING, ELP is the Exterior Front Housing Only

Motorola 1586437Z02, 1586437Z02, 1586437Z01: The 1586437Z02 Motorola Audio Jack Shroud for the Accessory Port. See Inset photo #12 for 1586437Z02 Location

Motorola 1589451G01, 1589451G01: The 1589451G01 Motorola Clips are the Spacer Clips for chargers WPLN4137 and WPLN4138. The 1589451G01 comes as a 5 Pack

Motorola 3015829H01, 3015829H01: The 3015829H01 Motorola Replacement Cord Assembly is for PMMN4021

Motorola 3015829H02, 3015829H02: The 3015829H02 Motorola Replacement Mic Cord Assembly is for PMMN4027 Speaker Mic

Motorola 3087791G01: The 3087791G01 Motorola Power Supply Cord features 120V US Plug and will fit several multi unit chargers    

Motorola 3205514W01, 3205514W01: The 3205514W01 Motorola Dust Cover Assembly if used with the Jedi Radio Series

Motorola  3264096H01  Seal, O-Ring CHUC.  3264096H01  Seal, O-Ring CHUC. 

Motorola 3286159Z01, 3286159Z01: The 3286159Z01 Motorola Control Top Seal can be viewed by with Inset photo #6 for picture and location

Motorola 3385906Z01, 3385906Z01: The 3385906Z01 Motorola Top Escutcheon Adhesive can be viewed with Inset photo #5 for picture and location

Motorola 36009257001, 36009257001: The 36009257001 Motorola Volume Control Knob for use with APX XE Radio Series

Motorola 36012020002, 36012020002: The 36012020002 Motorola Knob features Channel and Volume, Color Black and if for APX 4000 Radio  

Motorola 3605254V02, 3605254V02: The 3605254V02 is the Motorola  2 Channel Frequency Knob used with the JEDI Radio Series

Motorola 3605370Z01, 3605370Z01: The 3605370Z01 Motorola Frequency Knob comes as a 5 Pack. Works with Model 1,2 and 3. See Inset photo #13 for 3605370Z01 location

Motorola 3615205H01, 3615205H01: The 3615205H01 Motorola Knob is the Volume Knob and is used with the XPR Radio Series

Motorola 3675074C01, 3675074C01: The 3675074C01 is the Motorola Volume Knob used with RDX Radio Series and CP110

Motorola 3675581B01, 3675581B01: The 3675581B01 Motorola Volume Control Knob  

Motorola 3680529Z01, 3680529Z01: The 3680529Z01 Motorola Knob features Polyurethane Plastic and is a Volume Knob

Motorola 3680530Z02, 3680530Z02: The 3680530Z02 Motorola Knob features Polyurethane Plastic and is a Frequency Knob

Motorola 3686098B02  Knob, Volume WARIS Mobile.  3686098B02  Knob, Volume WARIS Mobile

Motorola  3980034F04  TERMINAL,PIN,MALE,1CONT,STRAIGHT,TERMINAL MALE 18 THRU 20 GA - PK/25.  3980034F04  TERMINAL,PIN,MALE,1CONT,STRAIGHT,TERMINAL MALE 18 THRU 20 GA - PK/25

Motorola  3980034F05   TERMINAL MALE 18 THRU 28 GA - PK/25.  3980034F05   TERMINAL MALE 18 THRU 28 GA - PK/25

Motorola 4205823V01, 4205823V01: The 4205823V01 is a Motorola Speaker Mic Clip. The 4205823V01 will fit many remote speaker mics

Motorola 4305372Z01, 4305372Z01: The 4305372Z01 Motorola Retainer Inserts are for use with XTS5000 Radio Black Volume Control Knob and comes as a 5 Pack

Motorola 6680702Z01, 6680702Z01: The 6680702Z01 Motorola Chassis Opener is used with EX600 Radio and EX600 XLS Radio. See second photo for proper use of 6680702Z01 Chassis Opener Tool

Motorola AAPMKN4003A, AAPMKN4003A, AAPMKN4003: The AAPMKN4003A is the Motorola Cloning Cable and is 2.5mm in length

Motorola AAPMKN4004A, AAPMKN4004A, AAPMKN4004: The AAPMKN4004A is the Motorola Test & Programming Cable. The AAPMKN4004A Programming/Test Cable connects the radio to the RLN4008 Radio Interface Box (RIB) for radio programming, and/or to the RLN4460 Radio Test Set for radio testing. The RIB and the radio test set can be connected at the same time and not interfere with each other

Motorola BDN6676D, BDN6676D, BDN6676: The BDN6676D Motorola Adapter features 3.5mm Threaded Accessory Port, Quick Disconnect Latch and Push to Talk (PTT)

Motorola BDN6783B, BDN6783B, BDN6783A, BDN6783: The BDN6783A Motorola Adapter features Threaded 3.5mm Port, Port Cover, Quick Disconnect and PTT  

Motorola CB000262A01, CB000262A01: The CB000262A01 Motorola Programming Cable is for SL 300 Radio

Motorola FKN8453A, FKN8453A, FKN8453: The FKN8453A is the Motorola DVI CPU Display Cable Assembly 16.4' 5.0M and works with MW810 mobile work station

Motorola HKKN4027A, HKKN4027A, HKKN4027: The HKKN4027A is the Motorola CPS Cable Kit. The HKKN4027A CLP Programming Cable connects  the radio to a PC for Programming

Motorola HKN6182B, HKN6182B, HKN6182: The HKN6182B is the Motorola Keyloading Cable Adapter CGAI "O5"

Motorola HKN6183B, HKN6183B, HKN6183A, HKN6183: The HKN6183B is the Motorola Programming Cable. The HKN6183B Does NOT include Software

Motorola HKN6186A, HKN6186A, HKN6186: The HKN6186A is the Motorola Trunion for the Remote Mount Control Head

Motorola HLN9457A  16-Pin Accessory Connector Kit. Includes 16 connector pins, 5 x 8 inch wire with pins attached and an extra housing.  HLN9457A  is replacing  HLN9457  and  HLN9457AR .  HLN9457A  16-Pin Accessory Connector Kit.

Motorola HLN9716D, HLN9716D, HLN9716, AAHLN9716B, AAHLN9716C: The HLN9716D Motorola Accessory Adapter features Mounting Screw, Rubber Gasket Seal, Multi Pin Connection, Converts to 2 Pin Use of Accessories  

Motorola HLN9820A, HLN9820A, HLN9820: The HLN9820A is the Motorola Accessory Dust Cover

Motorola HLN9900A, HLN9900A, HLN9900: The HLN9900A Motorola Audio Accessory Retainer features Screw Type Clamp that holds the Speaker Mic to the radio in order to prevent separation from the radio  

Motorola JMLN4638A, JMLN4638A, JMLN4638: The JMLN4638A Motorola Accessory Port Dust Cover can be viewed with Inset photo #13 for picture and location

Motorola NKN6508A, NKN6508A, NKN6508: The NKN6508A Motorola  Cable features Coiled Cable, 3.5mm Threaded Plugs and Cable Length is approx 15 Inches. The NKN6508 works with NTN1722 and NTN1625  

Motorola NNTN7869A, NNTN7869A, NNTN7869: The NNTN7869A Motorola Key Loader features 6 Pin Hirose Adapter to connect to the KVL4000 Keyloader for Programming and can be use with some 6 Pin Surveillance Kits  

Motorola PMDN4010AR, PMDN4010AR, PMDN4010: The PMDN4010AR Motorola PTT BEZEL is for BPR40 Radio

Motorola PMDN4014AR, PMDN4014AR, PMDN4014: The PMDN4014AR Motorola features Volume Knob and Clip for BPR40 Radio See Inset photo #13 and #14 for PMDN4014AR Volume Knob & Clip

Motorola PMDN4039AR, PMDN4039AR, PMDN4039: The PMDN4039AR Motorola CRAB EYE NUT OPENER works with the BPR40 Radio

Motorola PMDN4043CR, PMDN4043CR, PMDN4043AR, PMDN4043: The PMDN4043CR is the Motorola A8 Programming Test Cable. Software not included

Motorola PMDN4060AR, PMDN4060AR, PMDN4060: The PMDN4060AR is the Motorola Cloning Cable

Motorola PMDN4076AR, PMDN4076AR, PMDN4076: The PMDN4076AR is the Motorola Cloning Cable

Motorola PMDN4077AR, PMDN4077AR, PMDN4077: The PMDN4077AR is the Motorola Programming Cable

Motorola PMDN4101AR, PMDN4101AR, PMDN4101: The PMDN4101AR Motorola Channel Knob is for the CP185 Radio

Motorola PMKN4012B, PMKN4012B, PMKN4012A, PMKN4012: The Motorola PMKN4012B Programming Cable is used with the MotoTRBO XPR, APX and SRX Radio Series  

The PMKN4013C Motorola Programming Cable is for Radio Test and Alignment of the APX, SRX and XPR Radio Series. The PMKN4013 Programming Cable is NOT Returnable  

Motorola PMKN4018B, PMKN4018B, PMKN4018A, PMKN4018: The PMKN4018B is the Motorola MAP Universal Cable

Motorola PMKN4040A, PMKN4040A, PMKN4040: The PMKN4040A is the Motorola DMR Portable Telemetry Cable and is 6' Length

Motorola PMKN4071A, PMKN4071A, PMKN4071: The PMKN4071A Motorola Cable is an IMPRES Portable Radio NON-PC Adapter. The PMKN4071A Enables the MOTOTRBO Portable Radio to be Connected to an External Non-PC Based Application. The PMKN4071A Cable works with XPR Radio Series